| GB | 205F 0 05A80A | CRANKSHAFT-PULLEY |
|
A) FOR REMPLACEMENT OF A STEEL CRANKSHAFT WITH 4 COUNTERWEIGHTS BY A CAST-IRON CRANKSHAFT WITH 8 COUNTERWEIGHTS , IT'S IMPERATIVE TO CHANGE THE HALF-FLANGES AND THE HALF-SHELLS B) UP TO 5 168 072 : + 0524 10 (1) |
|||
| 01 | 0501 H1 | 01 | CRANKSHAFT |
 | |||
| 03 | 0515 K9 | 01 |
CRKSHAFT PULLEY DIAM 142 - 5 VOIES
- EXCEPT XUD7T |
| | |||
| 05 | 0516 49 | 01 | PULLEY SCREW 14X150-70 |
| | |||
| 06 | 0516 32 | 01 | PULLEY WASHER DIAM 14X39,8-8 |
| RP 0516 59 | 01 | ||
| | |||
| 07 | 0513 73 | 01 | TIMING PINION 21 DTS |
| | |||
| 08 | 0513 35 | 01 | PUMP CONTR PINN 18 DTS |
| RP 0513 64 | 01 | ||
| | |||
| 09 | 0127 28 | 01 | BEARING SEAL 90X110-7 |
| | |||
| 10 | 0326 22 | 01 | CRANKSHAFT SEAL 42X62-7 |
| | |||
| 11 | 0145 24 | 01 | HSG GASKET PLAT |
| | |||
| 12 | 0147 14 | 01 | COVR PLAT GASKT |
| | |||
| 14 | 0524 10 | 01 |
CENTRING BUSH
MARK BL43 UP TO S 5168072 |
| | |||
| 9A | 6962 12 | 01 | FLEXIBLE WASHER 7X13,7-0,8 |
| | |||
| 9B | 6976 06 | 01 | CRANKSHAFT KEY 13X6-7 |
| | |||
| 9C | 6968 52 | 01 | PIN 8X17,5 |
| | |||
| 9D | 6922 85 | 01 |
SELF-TAP SCREWS 7X100-40 |
| | |||
| 9E | 6915 26 | 01 | 7X100-25 |